H20 Primer And Liquid Mask
1L Tin
For a professional finish on windows and doors the H20 primer and liquid mask means you don’t have to worry about getting paint on the glass. It can be used over knots if the knots have been sanded.
Fast to apply with a brush, roller or sprayer
Primer and peelable mask in one
Easy to remove and it is ideal for glass/ timber doors
TECHNICAL DETAILS –
Theoretical coverage : 2m squared per litre at 200ЧM DFT
Recommended DFT : 200ЧM DFT
Usual number of coats : 2
Water Resistance : Resists Water Splash. Prolonged water contact may soften and remove product.
Weather Resistance : Do not leave unprotected for more than 3 months, externally
Colour : White when liquid, dries clear
Dry time (minimum) : Touch dry in 30 min to 1 hour @ 25°C, depending on RH
Full cure : 24 hours @ 25°C, 40% RH
Recoat time (minimum) : 1 hour @ 25°C
Primer required : No
Not to be used on any plastic or PVC surfaces. Always test on intended surface/substrate before use.
SETTINGS FOR SPRAYING H20
AIRLESS:
Tip Size – 517
Pump Pressure – 2000 PSI
HVLP :
Needle Number- 1.8MM Tip Size
Air Number – Turbo Control at 7
Set Fluid Outlet To Max
Dilution Required – The Less The Better – Start With 5% Clean Water
Watch our video
https://www.youtube.com/watch?v=tT_EE7iSQSE
1L Tin
For a professional finish on windows and doors the H20 primer and liquid mask means you don’t have to worry about getting paint on the glass. It can be used over knots if the knots have been sanded.
Fast to apply with a brush, roller or sprayer
Primer and peelable mask in one
Easy to remove and it is ideal for glass/ timber doors
TECHNICAL DETAILS –
Theoretical coverage : 2m squared per litre at 200ЧM DFT
Recommended DFT : 200ЧM DFT
Usual number of coats : 2
Water Resistance : Resists Water Splash. Prolonged water contact may soften and remove product.
Weather Resistance : Do not leave unprotected for more than 3 months, externally
Colour : White when liquid, dries clear
Dry time (minimum) : Touch dry in 30 min to 1 hour @ 25°C, depending on RH
Full cure : 24 hours @ 25°C, 40% RH
Recoat time (minimum) : 1 hour @ 25°C
Primer required : No
Not to be used on any plastic or PVC surfaces. Always test on intended surface/substrate before use.
SETTINGS FOR SPRAYING H20
AIRLESS:
Tip Size – 517
Pump Pressure – 2000 PSI
HVLP :
Needle Number- 1.8MM Tip Size
Air Number – Turbo Control at 7
Set Fluid Outlet To Max
Dilution Required – The Less The Better – Start With 5% Clean Water
Watch our video
https://www.youtube.com/watch?v=tT_EE7iSQSE
1L Tin
For a professional finish on windows and doors the H20 primer and liquid mask means you don’t have to worry about getting paint on the glass. It can be used over knots if the knots have been sanded.
Fast to apply with a brush, roller or sprayer
Primer and peelable mask in one
Easy to remove and it is ideal for glass/ timber doors
TECHNICAL DETAILS –
Theoretical coverage : 2m squared per litre at 200ЧM DFT
Recommended DFT : 200ЧM DFT
Usual number of coats : 2
Water Resistance : Resists Water Splash. Prolonged water contact may soften and remove product.
Weather Resistance : Do not leave unprotected for more than 3 months, externally
Colour : White when liquid, dries clear
Dry time (minimum) : Touch dry in 30 min to 1 hour @ 25°C, depending on RH
Full cure : 24 hours @ 25°C, 40% RH
Recoat time (minimum) : 1 hour @ 25°C
Primer required : No
Not to be used on any plastic or PVC surfaces. Always test on intended surface/substrate before use.
SETTINGS FOR SPRAYING H20
AIRLESS:
Tip Size – 517
Pump Pressure – 2000 PSI
HVLP :
Needle Number- 1.8MM Tip Size
Air Number – Turbo Control at 7
Set Fluid Outlet To Max
Dilution Required – The Less The Better – Start With 5% Clean Water
Watch our video
https://www.youtube.com/watch?v=tT_EE7iSQSE